CELESTRON

• The most compact and portable of Celestron’s German equatorial mounts offers the same rigidity as our larger mounts with minimal flexure and an improved industrial design
• Holds a maximum instrument capacity of 30 lb
• Every feature an astroimager wants: PEC, an autoguider port, the ability to image across the meridian, and more
• Dual saddle plate is compatible with narrow CG-5 dovetails and wider CGE dovetail. Also compatible with Vixen format dovetails longer than 100mm, but not compatible with Losmandy D format plates.
• Latitude range allows the mount to perform between 7° and 77° latitude
• Made by Celestron, USA

Conatins or respectively is compatible with the following Celestron-Technologies:

• A heavy-duty alt-azimuth mount for use with binoculars, spotting scopes or telescopes
• Adjustable aluminum legs provide a minimum height of 32” and a maximum height of 45”
• A sliding 1/4”-20 mounting bolt lets you adjust the balance point of your equipment for optimum stability
• Make slight adjustments to altitude and azimuth with intuitive slow motion handles
• Weight capacity of approximately 10 lbs
• Made by Celestron, USA

• Mit diesem Verbindungskabel können Sie Ihr GoTo-Teleskop auch über einen Laptop oder PC steuern. Wenn es über die Anschlussbuchse der Handsteuerbox verbunden ist, können Sie das Teleskop über Astronomie-Programme steuern. Das Kabel wird an die serielle Buchse Ihres Computers angeschlossen.
• Die aktuellste Version der NexRemote-Sofware können Sie kostenlos unter http://www.celestron.com/c3/support3/index.php?_m=downloads&_a=view&parentcategoryid=7&pcid=0&nav=0 herunterladen.
• Mit diesem Kabel können Sie auch Software-Upgrades von Handsteuerboxen mit Flash-Speicher einspielen.
• Zum Einsatz an einem USB-Port benötigen Sie einen Adapter von Seriell auf USB (18775, BNr. 821035).
• Länge:1,5 m

• Zwei 6-pin AUX-Port Eingänge
• Ein 6-pin AUX-Port Eingang
• Notwendiges Zubehör, um das StarSense AutoAlign Modul an Montierungen anzuschließen, die nur einen Anschluss für den Handkontroller haben

• Designed specifically for CG-5 mounts
• Create an extra auxiliary port on your Celestron computerized mount with this AUX Port Splitter
• Two auxiliary ports are required to use accessories like the Celestron StarSense AutoAlign on telescopes with only one built-in AUX port
• Adapter has two 6-pin auxiliary outputs and one 6-pin input
• Made by Celestron, USA

• Quality X-Cel LX 2x Barlow doubles the magnification of any 1.25” eyepiece
• 3-element apochromatic, fully multi-coated optics offer up bright, sharp images
• A rubber grip helps to avoid accidental drops
• Barrel is threaded to accept standard 1.25” filters
• A brass compression ring holds the eyepiece firmly in place
• Made by Celestron, USA

• 3-lens, apochromatic Barlow - Excellent sharpness and color fidelity
• Fully multi-coated optics - Increases contrast minimizes internal reflections
• Brass locking ring: Holds the eyepiece securely in place
• Ideal for owners of short focal length telescopes who want more magnification for lunar and planetary observation
• Made by Celestron, USA

• A great accessory for daytime terrestrial viewing with your telescope
• This 1.25” diagonal produces right side up and left-to-right correct images when used with refractors and catadioptric (Schmidt-Cassegrain) telescopes
• Inserts into 1.25” focusers or visual backs; accepts standard 1.25” eyepieces
• Made by CELESTRON, USA

• 40 lbs payload capacity
• Dual-fit Vixen/CG-5 and Losmandy/CGE dovetail saddle
• 2" steel legs with height index marks for quick leveling
• USB 2.0 port on hand control for direct links to a PC via ASCOM supported software.
• Internal cabling throughout for worry-free remote operation
• Low cog DC Servo motor with integrated optical encoders offer smooth, quiet operation
• Built-in polar alignment program to polar align on any star in the sky
• Longer clutch levers to make tightening and loosening of clutches easier
• Made by Celestron, USA

• Großzügige 25 kg Nutzlast
• Verbesserte Motoren mit mehr Drehmoment, für besseres Schwenken und Nachführen auch bei großer Zuladung
• Schwerlast-Zahnriemen minimieren das Getriebespiel und ermöglichen kurze Reaktionszeiten auch bei schwerer Zuladung
• Angefederte Schneckenräder aus Messung und Edelstahl reduzieren die Friktion und erhöhen die Passgenauigkeit
• Interne Verkabelung, Strom- und Zubehöranschlüsse bewegen sich nicht mit der Montierung mit
• Verbesserte Ergonomie durch verbesserte Einstellung der Polhöhe und intuitive Tragegriffe
• Home- und Begrenzungs-Switche – interne Hardware-Stops für R.A. und Dek, um Kabelgewirr und Kollisionen mit dem Stativ zu vermeiden
• Führt bis zu 20º beiderseits über den Meridian nach, unterstützt SkyPortal WiFi und StarSense AutoAlign Module.
• Beinhaltet eine ausgeklügelte neue Steuersoftware, die gemeinsam mit Planewave Instruments entwickelt wurde. Beherrscht multi-point Go-To Modeling, Fokussieren und Plate Solving.
• Made by Celestron, USA

Beinhaltet, bzw. ist kompatibel mit diesen Celestron-Technologien:

• Increased 34 kg load capacity. Exceptional load capacity to weight ratio
• Additional Aux accessory ports and autoguider port on the Dec axis for better cable management
• Larger 144mm diameter worm wheels to better and more accurately drive heavier loads
• Longer 270mm dovetail saddle to better support larger optical tubes
• Massive 70mm stainless steel tripod legs with a wider stance for improved stability under heavy loads
• Accessory tray holds three 1.25” and two 2” eyepieces with an upright stand for your smartphone or tablet
• Heavy duty, 31.5mm stainless steel counterweight shaft to support additional counterweights
• Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
• Internal cabling for worry-free remote operation. Power input and lower accessory ports remain stationary while the mount slews to avoid snags
• Includes Celestron's PWI telescope control software, co-developed by PlaneWave Instruments. Software features multi-point mount modeling for extremely precise pointing accuracy
• Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
• Integrated handles for easy transport and portability
• Ergonomically designed dovetail clamping knobs
• Made by Celestron, USA

• 12,5 mm Okular – 1,25" – Liefert 24fache Vergrößerung
• 6 mm Okular – 1,25" – Liefert 50fache Vergrößerung
• Mondfilter – 1,25" – Dämpft die Helligkeit des Monds und steigert den Kontrast, sodass die Details auf seiner Oberfläche besser zu sehen sind
• 5x24 Sucher mit Halterung – Erleichtert das Suchen von Himmelsobjekten, da er ein größeres Gesichtsfeld und niedrigere Vergrößerung hat
• mit Download Code – "The SkyX" – Planetariumsprogramm, mit dem Sie Sternkarten ausdrucken oder sich Astrofotos anzeigen lassen können, Sterne, Sternbilder und Planeten identifizieren können und vieles mehr. Betriebssystem: Windows XP und Vista sowie MacOS ab 10.4.8.
• inkl. Nylon Tragetasche

• Hochwertige Rotlichtleuchte mit zwei stufenlos regelbaren LEDs - das Standardwerkzeug für jeden Hobbyastronomen.
• Wenn die Augen des Beobachters einmal an die Dunkelheit adaptiert sind, sollte nur noch mit Rotlicht hantiert werden. Dies weitet die dunkel adaptierten Pupillen am wenigsten, und reicht aus, um alle wichtigen Arbeiten in der Dunkelheit vorzunehmen (inkl. 9-V Batterie).

• Ein moderner Reinigungsstift für alle kleineren optischen Flächen wie Okularlinsen, Fernglasobjektive, Filter usw.
• Durch ein spezielles, nicht flüssiges Reinigungselement hält dieser Reinigungsstift ewig, da er nicht austrocknen kann.
• Er ist kombiniert mit einem einziehbaren Staubpinsel.

• The Celestron 2.5x Luminos Barlow increases the magnification of any 2” or 1.25” eyepiece by two and a half times
• High-quality 4-element optics produce a flat field for sharp images that are free of extraneous color
• Hard-anodized aluminum barrel is threaded to accept 2” filters
• A brass compression ring holds eyepieces firmly in place, and large thumbscrews are easy to turn, even with gloves on
• A 2” to 1.25” adapter is included.  Allows the use of both 2” and 1.25” eyepieces.
• Made by Celestron, USA

• Reduce glare and increase contrast of the Moon with the Celestron 1.25” Moon Filter
• Also useful for extra bright planets as well as terrestrial viewing over sand or snow
• Threads onto most 1.25” eyepieces in seconds
• Made by CELESTRON, USA

• Most accurate way to guide – improved accuracy compared to using a separate guide scope
• 12.5mm multi-coated prism with optimized performance for maximum reflectivity and illumination to the autoguider
• Fixed-orientation helical focuser for easy, smooth and accurate autoguider focus
• 48mm clear aperture supports full frame cameras without vignetting
• Includes adapters with the correct spacing for DSLR cameras, Nightscape CCD and other popular astroimaging cameras
• Ideal for Schmidt- Cassegrain and EdgeHD telescopes
• Manufactured by CELESTRON, USA

• Equatorial wedge for Celestron NexStar 6/8SE and Evolution Alt-Az mounted computerized telescopes
• Enables long exposure astrophotography and autoguiding by tilting the telescope’s azimuth into an equatorial platform allowing it to track an arc around the polar axis.
• For beginner to intermediate planetary and deep space imagers
• Captive hardware, tool-less operation, easily adjusts under load
• Hefty yet portable design
• Sturdy latitude adjustment screw with easy to read scale and integrated Bubble level
• Made by CELESTRON, USA

• This combination focal reducer and field corrector lens accessory works with all Celestron 5", 6", 8", 9 1/4", 11" and 14" Schmidt-Cassegrain telescopes
• This clever accessory makes it possible to have a dual focal ratio instrument, without sacrificing image quality
• The Reducer/Corrector is f/6.3 for C5, C6, C8, C9¼ and C11 telescopes and f/7 for the C14 telescope
• Made by CELESTRON, USA

• The EdgeHD .7x Focal Reducer Lens makes your EdgeHD 1100 one full F-Stop faster than f/10, reducing your exposure time by half to capture the same brightness of object
• 5-element lens design
• Maintains similar flat-field performance as native EdgeHD optical design
• Increases field of view by 43% to better capture wide field images
• Threads directly onto the 3.25" threads of the EdgeHD which reduces mechanical vignetting and allows for use with larger (full frame) sensors and Off-Axis Guiders
• Maintains the identical back focus when used at f/10 and provides generous back focus to accommodate additional accessories and wide variety of cameras
• Allows use of existing EdgeHD T-Adapters with or without the Reducer Lens
• Manufactured by CELESTRON, USA

• The EdgeHD .7x Focal Reducer Lens makes your EdgeHD 1400 one full F-Stop faster than f/11, reducing your exposure time by half to capture the same brightness of object
• 5-element lens design
• Maintains similar flat-field performance as native EdgeHD optical design
• Increases field of view by 43% to better capture wide field images
• Threads directly onto the 3.25" threads of the EdgeHD which reduces mechanical vignetting and allows for use with larger (full frame) sensors and Off-Axis Guiders
• Maintains the identical back focus when used at f/11 and provides generous back focus to accommodate additional accessories and wide variety of cameras
• Allows use of existing EdgeHD T-Adapters with or without the Reducer Lens
• Made by CELESTRON, USA

• The EdgeHD .7x Focal Reducer Lens makes your EdgeHD 800 one full f-stop faster than f/10, doubling the equivalent exposure at f/10
• 4-element lens design
• Maintains similar flat-field performance as native EdgeHD optical design
• Increases field of view by 43% (double by area) to better capture wide field images
• Optimized for APS-C sized sensors, including most DSLR cameras and Nightscape CCD cameras
• Provides generous 105mm back focus to accomodate additional accessories and a wide variety of cameras
• Compatible with EdgeHD 800 T-Adapter
• Manufactured by CELESTRON, USA

• The EdgeHD .7x Focal Reducer Lens makes your EdgeHD 9.25" one full F-Stop faster than f/10, reducing your exposure time by half to capture the same brightness of object
• 4-element lens design
• Maintains similar flat-field performance as native EdgeHD optical design
• Increases field of view by 43% to better capture wide field images
• Threads directly onto the 3.25" threads of the EdgeHD which reduces mechanical vignetting and allows for use with larger (full frame) sensors and Off-Axis Guiders
• Maintains the identical back focus when used at f/10 and provides generous back focus to accommodate additional accessories and wide variety of cameras

• Qualitativ hochwertiges, geschirmtes Kabel (Länge 150cm) mit RS-232-Anschluss und USB-Stecker.
• Besonders gut geeignet, um Geräte mit seriellem Anschluss auch über eine größere Entfernung dennoch mittels USB an den Computer anzuschliessen.
• Treibersoftware auf Mini CD ist im Lieferumfang enthalten.
• Wir empfehlen den Schnittstellen-Umsetzer zusammen mit dem # 13171 CELESTRON RS-232-Kabel, um Celestron-Teleskope, deren Handcontroller noch nicht über eine USB-Buchse verfügt, mit Ihrem Computer zu verbinden. Nicht jeder USB-Konverter stellt die Verbindung zuverlässig her, dieses Modell hat sich im jahrelangen Einsatz bewährt.

• Orange anodised 3" dovetail rail for mounting C11 on CGE mounts.
• Manufactured by CELESTRON, USA

• Orange anodised 3" dovetail rail for mounting C14 on CGE mounts.
• Manufactured by CELESTRON, USA

• Orange anodised 3" dovetail rail for mounting C8 on CGE mounts
• The bar fits to all Celestron 8" SC and EHD telescopes
• Suitable for adaption to mounts with Losmandy style saddle plates, for example Celestron CGEM or CGX or Skywatcher EQ6
• Manufactured by CELESTRON, USA

• Orange anodised 3" dovetail rail for mounting C9.25 on CGE mounts.
• Manufactured by CELESTRON, USA

• This dovetail bar is mounted on top of the Rowe-Ackermann Schmidt-Astrograph and is used to attach accessories for CGE bars. The same bar is also attached to the bottom of the RASA 11".
• The aluminium rail provides a stable platform for accessories
• The dovetail rail fits onto the existing threaded holes of the RASA 11" and is supplied with all necessary screws
• For mounting accessories suitable for 3.3" CGE-Standard or Losmandy D-Series
• Manufactured by CELESTRON, USA