CELESTRON

• Connect your Canon mirrorless camera to the 8” RASA with one simple solution—no other adapters required.
• Places the camera sensors at the proper backfocus distance for the 8” RASA for pinpoint stars across the entire field of view.
• Uses the camera’s bayonet mount for a secure connection that won’t rotate once installed.
• Made of machined aluminum with black anodized finish.
• Compatible with Cannon M200, M100, and M10 models.
• Manufactured by CELESTRON, USA

• Connect your Sony mirrorless camera to the 8” RASA with one simple solution—no other adapters required.
• Places the camera sensors at the proper backfocus distance for the 8” RASA for pinpoint stars across the entire field of view.
• Uses the camera’s bayonet mount for a secure connection that won’t rotate once installed.
• Made of machined aluminum with black anodized finish.
• Compatible with Sony a5 and a6 E-mount models.
• Manufactured by CELESTRON, USA

• T-Adapter for 9.25, 11 & 14” EdgeHD optical tubes. It threads onto the rear cell
• This T-Adapter allows you to attach your 35 mm DSLR camera to the prime focus of your EdgeHD telescope
• Manufactured by CELESTRON, USA

• T-Adapter for 9.25, 11 & 14” EdgeHD optical tubes. It threads onto the rear cell
• This T-Adapter allows you to attach your 35 mm DSLR camera to the prime focus of your EdgeHD telescope
• Manufactured by CELESTRON, USA

• The Celestron T-Adapter attaches an SLR or DSLR camera to a Schmidt-Cassegrain telescope for prime focus photography
• Threads on to the rear cell of Schmidt-Cassegrain telescopes
• T-threads accept camera brand specific T-Ring (sold separately)
• Manufactured by CELESTRON, USA

• T-Adapter for 8” EdgeHD optical tube threads onto the rear cell
• This T-Adapter allows you to attach your 35 mm DSLR camera to the prime focus of your EdgeHD telescope
• Manufactured by CELESTRON, USA

• This Celestron T-Adapter connects a DSLR camera to a NexStar 4SE or C90 spotting scope for prime focus photography
• Threads onto the rear cell for secure, wiggle-free connection
• T-threads accept camera brand specific T-Ring (sold separately)
• Manufactured by CELESTRON, USA

• The Celestron Universal T-Adapter connects a DSLR or SLR camera to a refractor for prime focus photography
• The adapter’s chrome barrel slides into any focuser that accepts 1.25” accessories
• T-Threads accept camera brand specific T-Ring (sold separately)
• Manufactured by CELESTRON, USA

• The Celestron Universal Barlow & T-Adapter is three accessories in one!
• 2X Barlow: Use during visual observing to double the magnification of every 1.25” eyepiece you own
• Prime Focus Photography: Use the T-Adapter portion of this accessory to transform your telescope into a giant telephoto lens
• Tele-Extended Photography: Use the T-Adapter with Barlow to get double the magnification of prime focus mode
• T-threads accept camera brand specific T-Ring (sold separately)
• Manufactured by CELESTRON, USA

• This Celestron T-Ring attaches to all Canon EOS EF SLR and DSLR camera bodies
• Sturdy bayonet flange locks in place just like a lens, providing secure contact
• Attaches to a variety of camera adapters and accessories via standard T-Threads
• Manufactured by CELESTRON, USA

This T-Ring fits Nikon model cameras only.

• This Celestron T-Ring attaches to all Nikon SLR and DSLR camera bodies
• Sturdy bayonet flange locks in place just like a lens, providing secure contact
• Attaches to a variety of camera adapters and accessories via standard T-Threads
• Manufactured by CELESTRON, USA

This T-Ring fits Nikon model cameras only.

• The most compact and portable of Celestron’s German equatorial mounts offers the same rigidity as our larger mounts with minimal flexure and an improved industrial design
• Holds a maximum instrument capacity of 30 lb
• Every feature an astroimager wants: PEC, an autoguider port, the ability to image across the meridian, and more
• Dual saddle plate is compatible with narrow CG-5 dovetails and wider CGE dovetail. Also compatible with Vixen format dovetails longer than 100mm, but not compatible with Losmandy D format plates.
• Latitude range allows the mount to perform between 7° and 77° latitude
• Made by Celestron, USA

Conatins or respectively is compatible with the following Celestron-Technologies:

• A heavy-duty alt-azimuth mount for use with binoculars, spotting scopes or telescopes
• Adjustable aluminum legs provide a minimum height of 32” and a maximum height of 45”
• A sliding 1/4”-20 mounting bolt lets you adjust the balance point of your equipment for optimum stability
• Make slight adjustments to altitude and azimuth with intuitive slow motion handles
• Weight capacity of approximately 10 lbs
• Made by Celestron, USA

• 40 lbs payload capacity
• Dual-fit Vixen/CG-5 and Losmandy/CGE dovetail saddle
• 2" steel legs with height index marks for quick leveling
• USB 2.0 port on hand control for direct links to a PC via ASCOM supported software.
• Internal cabling throughout for worry-free remote operation
• Low cog DC Servo motor with integrated optical encoders offer smooth, quiet operation
• Built-in polar alignment program to polar align on any star in the sky
• Longer clutch levers to make tightening and loosening of clutches easier
• Made by Celestron, USA

• Großzügige 25 kg Nutzlast
• Verbesserte Motoren mit mehr Drehmoment, für besseres Schwenken und Nachführen auch bei großer Zuladung
• Schwerlast-Zahnriemen minimieren das Getriebespiel und ermöglichen kurze Reaktionszeiten auch bei schwerer Zuladung
• Angefederte Schneckenräder aus Messung und Edelstahl reduzieren die Friktion und erhöhen die Passgenauigkeit
• Interne Verkabelung, Strom- und Zubehöranschlüsse bewegen sich nicht mit der Montierung mit
• Verbesserte Ergonomie durch verbesserte Einstellung der Polhöhe und intuitive Tragegriffe
• Home- und Begrenzungs-Switche – interne Hardware-Stops für R.A. und Dek, um Kabelgewirr und Kollisionen mit dem Stativ zu vermeiden
• Führt bis zu 20º beiderseits über den Meridian nach, unterstützt SkyPortal WiFi und StarSense AutoAlign Module.
• Beinhaltet eine ausgeklügelte neue Steuersoftware, die gemeinsam mit Planewave Instruments entwickelt wurde. Beherrscht multi-point Go-To Modeling, Fokussieren und Plate Solving.
• Made by Celestron, USA

Beinhaltet, bzw. ist kompatibel mit diesen Celestron-Technologien:

• Increased 34 kg load capacity. Exceptional load capacity to weight ratio
• Additional Aux accessory ports and autoguider port on the Dec axis for better cable management
• Larger 144mm diameter worm wheels to better and more accurately drive heavier loads
• Longer 270mm dovetail saddle to better support larger optical tubes
• Massive 70mm stainless steel tripod legs with a wider stance for improved stability under heavy loads
• Accessory tray holds three 1.25” and two 2” eyepieces with an upright stand for your smartphone or tablet
• Heavy duty, 31.5mm stainless steel counterweight shaft to support additional counterweights
• Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
• Internal cabling for worry-free remote operation. Power input and lower accessory ports remain stationary while the mount slews to avoid snags
• Includes Celestron's PWI telescope control software, co-developed by PlaneWave Instruments. Software features multi-point mount modeling for extremely precise pointing accuracy
• Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
• Integrated handles for easy transport and portability
• Ergonomically designed dovetail clamping knobs
• Made by Celestron, USA