Baader OTP II 19W: Outdoor Telescope Power Supply 19W with Angled Plug

SKU: 12484

GTIN: 4047825045362

HAN: 12484

Category: Telescopes

In Stock
Delivery Time approx.: 2 business days (DE - int. shipments may differ)

€ 29,50

incl. 19% VAT (All Non-EU Countries tax-free or with a valid EU Vat. No.) , plus

Brands Shop:

Power supply designed for outdoor use at cold temperatures
Exchangeable plug for EU/US/UK included
12.8V DC / 1.5 Amp (19 Watt) output, Large power reserve even at cold temperatures - suitable for temperatures from -25° to +40°
2.5m cable length incl. reverse polarity protected Protective-disconnect angled plug 5.5mm / 2.1mm
successor model of the previous 19W Outdoor Power Supply Power Supply #2457610 (no longer in production).

pcs.

Baader OTP II 19W: Outdoor Telescope Power Supply 19W with angled plug

Power supply designed for outdoor use at cold temperatures
Exchangeable plug for EU/US/UK included
12.8V DC / 1.5 Amp (19 Watt) output, Large power reserve even at cold temperatures - suitable for temperatures from -25° to +40°
2.5m cable length incl. reverse polarity protected Protective-disconnect angled plug 5.5mm / 2.1mm
successor model of the previous 19W Outdoor Power Supply Power Supply #2457610 (no longer in production).

Description

This switching power supply for outdoor use was especially designed to meet the needs of amateur astronomers in northern latitudes. This 12.8 V/1.5 A fixed voltage power supply with reverse polarity protected protective-disconnect right-angle plug fits for example to all smaller Celestron mounts (Advanced GT, NexStar SE, NexStar SLT, LCM, CPC) and offers great advantages at a slightly higher price compared to normal indoor plug-in power supplies. It also fits all other common telescope mounts and devices with this power requirement and plug (tip positive/plus inside, plug diameter 5.5mm)

Common plug-in power supplies with 12 V nominal voltage are designed for operation "in the living room". When used outdoors, the effective voltage drops significantly at low temperatures. Already at -10°C the voltage can drop to 10.5 V - then the operation of many electrical devices becomes unreliable. Especially a telescopic electronic tries to compensate the missing voltage by higher power consumption and motor synchronization fluctuations occur, which are usually attributed to the electronics of the mount - although the insufficient power supply is the actual cause.

The Outdoor-Telescope-Power II power supply unit therefore supplies a DC voltage of 12.8 Volt/1.5 A over the entire AC voltage range from 100 to 240 V that is common worldwide. Even at extreme minus temperatures, the voltage cannot drop so low that the electronic components or the motors of a telescope mount would suffer damage. With 1.5 A/19 Watt continuous output, there is sufficient power reserve even at full load, even with heavy instrument loads on the mount and large load changes. In addition to the increased basic voltage, the thermal working range of -25° to +40° is optimally adapted for outdoor operation.

The supply cable between the power supply unit and the angled plug is extended to 2.5m, so that the power supply unit does not become a tripping hazard and can be conveniently stored near the floor. The angled plug protects the telescope electronics from damage to the socket and the power supply unit from cable breaks or other damage. If the cable is accidentally stepped on, the plug socket is not torn out of the telescope by lateral pulling, but the connection is released in a straight line at the coupling point in front of the right-angle plug.

Optimal for the travelling amateur astronomer!

Specifications

Manufacturer	Baader Planetarium
Item Number (#)	2457615
EAN Code	4047825045362
Type	Charger
Adaptable to	small Celestron mounts
Input (V)	100V - 240V
Output (V)	12. 8V DC
Power Output	1.5A
Power Output	19W
Cable Length	2, 5

In the Box

1x Baader OTP II 19W: Outdoor Telescope Power Power Supply 19W with angled plug

There are no reviews yet.

Contact data

Title

Last Name

Ask our Experts

Your question

I agree that my data will be permanently stored for contact and assignment. ()

Manufacturer according to GPSR
Baader Planetarium GmbH, Zur Sternwarte 4, 82291 Mammendorf, Bayern, Deutschland, kontakt@baader-planetarium.de, https://www.baader-planetarium.com/