Leofoto Carbon Fiber Tripod LY-224C Mr.Y + LH-25R Ball Head (Yellow)
- Available in the variations yellow, red, blue and black
- Extreme light: only 1 kg
- Load capacity 6 kg
- 4 leg segments
- 22/19/16/13 mm tube diameter
- Min. /Max. Height 12.5 cm to 141 cm
- Incl. Tripod bag
Description
The tripods from the Mr.Y series from Leofoto are ideal for travel and photography indoors, for example at events or in museums, as well as in urban areas in general. They are particularly light and have a very short transport length. The special highlight is the Y-shaped center column. This means that the diameter of the tripod head can be significantly smaller (see illustration). This means that the tripod even fits into a briefcase.
The operation is very simple and intuitive: The legs can be extended using rubberized twist locks. The center column is held in place by an ergonomic clamping lever. The height of the camera can be adjusted by adjusting the center column. The spread angle of the tripod legs can be adjusted in four levels. The highest stability is achieved at 42°. For special perspectives, the angle can be increased up to 82°. The short center column then allows a real worm's eye view.
Short center column? Yes! You can replace the long center column with a much shorter one, which is included. This can be done without any tools. The advantage, in addition to the worm's eye view already mentioned, is the increase in stability. The long center column can also be mounted upside down for unusual shooting situations. The ball head LH-25/R is one of the lightest and smallest from Leofoto. This contributes significantly to easy transportability. The head weighs only 0.25 kg, but supports up to 6 kg! Its height is 75 mm and the base diameter is 36 mm. It is mounted on the tripod using a 3/8" thread.
With a large, ergonomic clamping lever, the ball head can be released to allow the camera to move freely. The clamp itself can also be rotated through 360°. This means that A panoramic shot can be taken with the ball head locked. The ball head is equipped with a clamp according to the Arca-Swiss standard and a quick-release plate. The legs of this tripod are made from 10 layers of carbon fibers (carbon) wound. The special diamond-shaped winding of these layers ensures additional stability and vibration damping with extremely low weight!
Leofoto uses high-quality for the metal parts 6061-T6 aluminum alloy with magnesium and silicon as alloy components. This corrosion-resistant material is characterized by high strength and good toughness. The yield strength is comparable to mild steel. All parts are manufactured on the most modern CNC Machines are milled from solid material and are therefore significantly more stable than cast parts. Leofoto makes no compromises here either!
The tripod feet have a stainless steel core. The outer rubber is shaped in such a way that there is a flat contact surface for every spread angle. The beautiful transport bag is water-repellent and has padded handles. The handles are attached so that the center of gravity is under the handles. The transport bag is equipped with an adjustable shoulder strap.
Video
Best Traveling Tripod - Leofoto Mr. Y Series Tripod Kit
The video opens in a new window.
Specifications
| Load capacity |
6 kg |
| Head mounting type |
3 /8"-16 male |
| Maximum working height |
141 cm |
| Minimum working height |
12.5 cm |
| Folded length |
48 cm |
| Material |
Carbon fiber |
| Center column |
Yes |
| Weight |
1 kg |
| Leg lock type |
Twist-lock |
| Leg sections |
4 |
| Foot features |
Rubber foot; optional spikes, snowshoes |
| Independent leg spread |
Yes |
| Leg diameter |
22/19/16/13 mm |
| Box level |
Yes |
Leofoto LH-25R Mini Ball Head
- Low Centre of Gravity: only 67mm high
- Made of T-6061 Aluminum Alloy
- 90° Portrait Notch
- Load Capacity: 6kg
- Non-slipping, Grease-free Bearing Balls
- Panning Base with Index Mark for Separate Rotation
- Arca compatibel
Description
Made of aluminum with an anodized finish for durability, this LH-25R Mini Ball Head from Leofoto uses a screw-knob clamp at its top to attach to any mounting plate that is 25mm in length. It is made to support gear as heavy as 11 lb for 360° panning, and has a cutout notch at its base to enable 90° tilting in one direction.
The ball head boasts a compact design, with a fixed height of 2.6" and a weight of 6 oz, that makes it easy to travel with and use. A single lever is available for adjusting head position, which pulls out to enable control and fits back in to lock everything in place. The LH-25R has a 3/8"-16 bottom mount and comes with a 3/8" to 1/4" bushing reducer, allowing you to mount it to tripods with either thread size.
Specifications
| Load Capacity |
6 kg |
| Weight |
1000 g |
| Tripod Mounting |
3/8"-16 mount, with a bushing adapter available for those with 1/4" screws |
| Bubble Level |
no |
| Rotation |
360 Degrees |
| Tilting |
90 Degrees |
| Arca Swiss compatible |
yes |
| Ball Diameter |
25 mm |
| Height |
67mm |
| Indexing Skale |
with |
| QR-Plate included |
yes |
| Material |
T-6061 Aluminum Alloy |
In the Box
- 1x Leofoto Carbon Fiber Tripod LY-224C Mr.Y + LH-25R Ball Head (Yellow)
- 1x Short Column
- 1x Tool
- 1x Tripod Bag
Tripod Components
Cameras and tripods have a long-standing partnership, maintaining relevance and unmatched functionality in a world dominated by image stabilization and Photoshop tricks. Although the form and function of a tripod are much simpler to understand than today’s DSLRs, with their extensive features, selecting the right setup from a variety of manufacturers and seemingly comparable models can be a daunting task. This article outlines the basic types of tripod kits every photographer should consider, and discusses the various categories of tripod heads and legs for those looking to build a custom setup.
Tabletop Tripods
For some, the simplest and smallest solution is often the best, and for this audience, a tabletop tripod offers a particularly compact solution for the everyday photographer. These tripods come in a range of types and sizes and are usually sold as kits with a pre-mounted head and legs. They are typically inseparable and reach a maximum height of no more than 30cm. These tripods are ideal for travelers, hikers, or those photographing in areas where carrying full-sized camera equipment might be restricted. Those needing a table support may also consider a flexible variant, such as the Joby Gorillapod line. These compact and lightweight supports can be used on a traditional flat surface or wrapped around various objects (such as branches, pipes, and handlebars) to stabilize your camera on uneven terrain or create a unique new photographic perspective.
The Tripod System
For the passionate, ambitious, and professional photographer, investing in a modular tripod system—or, for the layperson, a tripod with a removable head and a set of durable, versatile legs—is the preferred choice. Whether purchased together as part of an extended set or separately, investing in a system ensures the user obtains customizable, high-quality equipment that can be adapted to specific photography needs either now or in the future. Below, we outline some of the different options for purchasing a pre-made tripod kit or assembling your own tripod kit using components selected to meet your individual requirements.
The 3-Way Pan-Tilt Head
When most people think about tripod functionality, they envision the movement and brand-licensed style of the classic three-way head. This design remains popular with beginners for its ease of use and relatively precise movement. The head consists of three separate arms controlling vertical tilt, horizontal tilt, and 360-degree panning. To adjust the position of each angle, simply turn the handle for the desired angle, position the camera, and then tighten the handle again to lock the camera in place—it's that simple. Three-way heads are commonly used for landscape, portrait, still-life, macro, or product photography, but they can be used for almost any photographic application.
The Ball Head
The ball head is currently the most modern and generally preferred head style, partly due to its compact size (compared to three-way heads), lightweight build, and ease of adjustment. Unlike the three-way head, ball heads save size and weight by allowing you to use the camera itself as the "handle," positioning the camera in any direction with just one rather than three knobs. Ball heads typically feature dual or triple control, allowing photographers to control the ball’s movement and friction with separate knobs. Tri-control designs often implement a third knob that controls the 360-degree panning separately from the main ball lock. Due to its size and speed, this head style is popular among sports, action, nature, travel, and studio photographers. Like the three-way head, it can also be used for almost any photographic application.
The Gimbal Head
Gimbal heads are practically essential in the world of advanced sports and wildlife photography, as they support the large telephoto lenses that are an undeniable hallmark of the craft. The gimbal head is designed to support and balance large lenses and camera bodies, allowing the user to follow a moving subject vertically and horizontally, and, if properly balanced, retain its last position even when the photographer’s hand leaves the camera. They are generally the largest and heaviest head style, but for photographers who need them, their utility is unrivaled. It is also worth noting that most gimbal heads are not sold with a mounting plate; one must be selected specifically for the lens in use. When investing in a gimbal system, you should always purchase a suitable lens mounting plate that provides enough length to adequately balance your equipment.
The Fluid Head
Since almost every camera now includes advanced video functions, many photographers have begun incorporating video components into their tripod kits, with the fluid head being the most significant of these additions. The fluid head is designed to reduce resistance when recording video, allowing for smooth pans and tilts along two axes, and the integrated "fluid" cartridge reduces unwanted shakes, vibrations, and jitters. While each tripod head has a maximum load capacity, the stated maximum of a fluid head should be seen as a guideline that should never be exceeded. Balanced weight is essential for good fluid head performance, and resistance to an unbalanced load can impair the video-smoothing properties of the head, especially in the hands of beginner videographers.
Material Choice
Tripod legs—whether for beginners or professionals—are a relatively straightforward matter, limited to three simple factors: weight, load capacity, and price. The often heavier, cheaper, and somewhat more durable material for tripod legs is an oldie but goodie: aluminum. Although its weight may not be ideal for travel, aluminum tripods benefit from this weight with increased stability and the ability to withstand daily use and minor impacts. However, aluminum legs are subject to the environment in which they are used, which simply means they heat up in the sun, cool down in the cold, and can rust if not properly cleaned after exposure to freshwater
and saltwater. The second, newer, and more expensive material option is carbon fiber, which has become a darling in the world of outdoor and landscape photography due to its lighter weight and excellent rigidity. Although the price difference between aluminum and carbon fiber has decreased significantly in recent years, it is still substantial for higher-quality tripod brands.
