CELESTRON

• The EdgeHD .7x Focal Reducer Lens makes your EdgeHD 1400 one full F-Stop faster than f/11, reducing your exposure time by half to capture the same brightness of object
• 5-element lens design
• Maintains similar flat-field performance as native EdgeHD optical design
• Increases field of view by 43% to better capture wide field images
• Threads directly onto the 3.25" threads of the EdgeHD which reduces mechanical vignetting and allows for use with larger (full frame) sensors and Off-Axis Guiders
• Maintains the identical back focus when used at f/11 and provides generous back focus to accommodate additional accessories and wide variety of cameras
• Allows use of existing EdgeHD T-Adapters with or without the Reducer Lens
• Made by CELESTRON, USA

• The EdgeHD .7x Focal Reducer Lens makes your EdgeHD 9.25" one full F-Stop faster than f/10, reducing your exposure time by half to capture the same brightness of object
• 4-element lens design
• Maintains similar flat-field performance as native EdgeHD optical design
• Increases field of view by 43% to better capture wide field images
• Threads directly onto the 3.25" threads of the EdgeHD which reduces mechanical vignetting and allows for use with larger (full frame) sensors and Off-Axis Guiders
• Maintains the identical back focus when used at f/10 and provides generous back focus to accommodate additional accessories and wide variety of cameras

• The EdgeHD .7x Focal Reducer Lens makes your EdgeHD 800 one full f-stop faster than f/10, doubling the equivalent exposure at f/10
• 4-element lens design
• Maintains similar flat-field performance as native EdgeHD optical design
• Increases field of view by 43% (double by area) to better capture wide field images
• Optimized for APS-C sized sensors, including most DSLR cameras and Nightscape CCD cameras
• Provides generous 105mm back focus to accomodate additional accessories and a wide variety of cameras
• Compatible with EdgeHD 800 T-Adapter
• Manufactured by CELESTRON, USA

• The EdgeHD .7x Focal Reducer Lens makes your EdgeHD 1100 one full F-Stop faster than f/10, reducing your exposure time by half to capture the same brightness of object
• 5-element lens design
• Maintains similar flat-field performance as native EdgeHD optical design
• Increases field of view by 43% to better capture wide field images
• Threads directly onto the 3.25" threads of the EdgeHD which reduces mechanical vignetting and allows for use with larger (full frame) sensors and Off-Axis Guiders
• Maintains the identical back focus when used at f/10 and provides generous back focus to accommodate additional accessories and wide variety of cameras
• Allows use of existing EdgeHD T-Adapters with or without the Reducer Lens
• Manufactured by CELESTRON, USA

• This combination focal reducer and field corrector lens accessory works with all Celestron 5", 6", 8", 9 1/4", 11" and 14" Schmidt-Cassegrain telescopes
• This clever accessory makes it possible to have a dual focal ratio instrument, without sacrificing image quality
• The Reducer/Corrector is f/6.3 for C5, C6, C8, C9¼ and C11 telescopes and f/7 for the C14 telescope
• Made by CELESTRON, USA

• 10x Magnification
• 25mm Objective
• BAK4 Roof Prism
• Multi-Coated Optics
• 5.8° Angle of View
• Grooved Finger Rests
• Rubber Armored Exterior
• Twist-Up Rubber Eyecup
• Waterproof & Fogproof Performance
• Made by Celestron, USA

• A heavy-duty alt-azimuth mount for use with binoculars, spotting scopes or telescopes
• Adjustable aluminum legs provide a minimum height of 32” and a maximum height of 45”
• A sliding 1/4”-20 mounting bolt lets you adjust the balance point of your equipment for optimum stability
• Make slight adjustments to altitude and azimuth with intuitive slow motion handles
• Weight capacity of approximately 10 lbs
• Made by Celestron, USA

• Großzügige 25 kg Nutzlast
• Verbesserte Motoren mit mehr Drehmoment, für besseres Schwenken und Nachführen auch bei großer Zuladung
• Schwerlast-Zahnriemen minimieren das Getriebespiel und ermöglichen kurze Reaktionszeiten auch bei schwerer Zuladung
• Angefederte Schneckenräder aus Messung und Edelstahl reduzieren die Friktion und erhöhen die Passgenauigkeit
• Interne Verkabelung, Strom- und Zubehöranschlüsse bewegen sich nicht mit der Montierung mit
• Verbesserte Ergonomie durch verbesserte Einstellung der Polhöhe und intuitive Tragegriffe
• Home- und Begrenzungs-Switche – interne Hardware-Stops für R.A. und Dek, um Kabelgewirr und Kollisionen mit dem Stativ zu vermeiden
• Führt bis zu 20º beiderseits über den Meridian nach, unterstützt SkyPortal WiFi und StarSense AutoAlign Module.
• Beinhaltet eine ausgeklügelte neue Steuersoftware, die gemeinsam mit Planewave Instruments entwickelt wurde. Beherrscht multi-point Go-To Modeling, Fokussieren und Plate Solving.
• Made by Celestron, USA

Beinhaltet, bzw. ist kompatibel mit diesen Celestron-Technologien:

• 40 lbs payload capacity
• Dual-fit Vixen/CG-5 and Losmandy/CGE dovetail saddle
• 2" steel legs with height index marks for quick leveling
• USB 2.0 port on hand control for direct links to a PC via ASCOM supported software.
• Internal cabling throughout for worry-free remote operation
• Low cog DC Servo motor with integrated optical encoders offer smooth, quiet operation
• Built-in polar alignment program to polar align on any star in the sky
• Longer clutch levers to make tightening and loosening of clutches easier
• Made by Celestron, USA

• The most compact and portable of Celestron’s German equatorial mounts offers the same rigidity as our larger mounts with minimal flexure and an improved industrial design
• Holds a maximum instrument capacity of 30 lb
• Every feature an astroimager wants: PEC, an autoguider port, the ability to image across the meridian, and more
• Dual saddle plate is compatible with narrow CG-5 dovetails and wider CGE dovetail. Also compatible with Vixen format dovetails longer than 100mm, but not compatible with Losmandy D format plates.
• Latitude range allows the mount to perform between 7° and 77° latitude
• Made by Celestron, USA

Conatins or respectively is compatible with the following Celestron-Technologies:

• Increased 34 kg load capacity. Exceptional load capacity to weight ratio
• Additional Aux accessory ports and autoguider port on the Dec axis for better cable management
• Larger 144mm diameter worm wheels to better and more accurately drive heavier loads
• Longer 270mm dovetail saddle to better support larger optical tubes
• Massive 70mm stainless steel tripod legs with a wider stance for improved stability under heavy loads
• Accessory tray holds three 1.25” and two 2” eyepieces with an upright stand for your smartphone or tablet
• Heavy duty, 31.5mm stainless steel counterweight shaft to support additional counterweights
• Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
• Internal cabling for worry-free remote operation. Power input and lower accessory ports remain stationary while the mount slews to avoid snags
• Includes Celestron's PWI telescope control software, co-developed by PlaneWave Instruments. Software features multi-point mount modeling for extremely precise pointing accuracy
• Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
• Integrated handles for easy transport and portability
• Ergonomically designed dovetail clamping knobs
• Made by Celestron, USA