Turn off the monolight and disconnect the power cord
from the power supply. Wait at least 30 minutes to
have cooled the lamp and adjusting the flash tube.
Remove the light shaper / softbox and then adjusting the lamp.
Do not touch the flash tube and adjusting lamp with bare
Fingers, but always use a clean, dry cloth
or cotton gloves.
Now remove the wire that the
Flash tube spans and pull the flash tube gently from the
Base. Now remove the two small screws on the socket connector
and remove the flash tube. Insert the new flash tube as far as
it goes into the socket connector and tighten the screws again.
Press the new tube and then gently stretch into the base and
the wire spring back to the tube.
In the Box
1 x NICEFOTO Flash Tube for Monolight